FUJITSU SPARC M4000 - Manual (Page 22)

xx SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
Audience
This manual is intended for users, specifically SPARC Enterprise system
management/maintenance administrators. Moreover, the system administrator is
required to have the following knowledge:
■ Solaris TM Operating System and Unix command
■ SPARC Enterprise system and basic knowledge of XSCF
Glossary
For the terms used in the “SPARC Enterprise Mx000 Servers Documentation” on
page xxii , refer to the SPARC Enterprise M4000/M5000/M8000/M9000 Servers Glossary
Structure and Contents of this Manual
This manual is organized as described below:
■
Chapter 1
This chapter provides an overview of the system monitor and control facility
(eXtended System Control Facility, or XSCF).
■
Chapter 2
This chapter explains how to set up XSCF.
■
Chapter 3
This chapter describes how to connect consoles and terminals to this system in
order to use XSCF.
■
Chapter 4
This chapter describes server hardware operation.
■ Chapter 5
This chapter describes how to use the XSCF Shell. The chapter describes how
to use commands and log in with an XSCF user account, and it explains
command errors.