FUJITSU SPARC M4000 - Manual (Page 239)

Chapter 5 Overview of the XSCF Shell 5-3
setdate Sets the XSCF time.
showdate Displays the XSCF time.
setntp Configures the NTP server.
showntp Displays the SSH settings and fingerprint.
resetdateoffset Resets the time subtraction between the XSCF and the domain.
setssh Configures SSH. Generates RSA and DSA keys for SSH2 host authentication.
showssh Displays the SSH settings and fingerprint.
settelnet Configures telnet.
showtelnet Displays the telnet settings.
setautologout Sets the session timeout time of the XSCF shell.
showautologout Displays the session timeout time of the XSCF shell.
setsmtp Configures the SMTP server.
showsmtp Displays the the SMTP server settings.
setemailreport Configures mail notification.
showemailreport Displays the mail notification settings.
setlookup Enables or disables the use of an LDAP server for authentication and user privilege
lookup.
showlookup Displays information about whether an LDAP server is used for authentication and
user privilege lookup.
setldap Configures LDAP client settings.
showldap Displays LDAP client settings.
sethttps Configures the https settings.
showhttps Displays the https settings.
setupplatform • Sets up platform-specific settings.
Note: In the platform-specific settings, the following items can be optionally
configured. Each item is the same as the setting of
Chapter 2 .
• User Account settings
• XSCF Network Settings
• Internal DSCP Network
• Domain Name Service
• Network Time Protocol
• SSH
• HTTPS Server
• Email Reports
TABLE 5-1 XSCF Commands (Continued)
Command Description