FUJITSU SPARC M4000 - Manual (Page 251)

Chapter 5 Overview of the XSCF Shell 5-15
5.6 View and Archive the XSCF Logs
This section describes the XSCF commands that fetch and display server operation
logs, console logs, temperature histories, and error logs from XSCF log files which
also configure the information for archiving XSCF logs to a host.
For details on error logs, see Appendix B .
■ showlogs
■ showarchiving / setarchiving
showlogs
The showlogs (8) command displays error logs, power logs, event logs, console
logs, panic logs, IPL logs, and temperature/humidity logs. The system administrator
can use the command to check the operating status of the server and the cause of
any error in the system.
showarchiving / setarchiving
The showarchiving (8) and setarchiving (8) commands display and specify,
respectively, the information required for saving XSCF log information to servers.
The system administrator can use these commands to set up automatic, secure
archiving of logs to a specified archive host.
5.7 User Management and Security
Commands
This section describes the typical XSCF commands for user management and
security management.
■ showuser / adduser / deleteuser / enableuser / disableuser
■ password / setprivilege / showpasswordpolicy / setpasswordpolicy
■ showlookup / setlookup / showldap / setldap
■ showaudit / setaudit / viewaudit