FUJITSU SPARC M4000 - Manual (Page 318)

9-24 SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
Utility
The Pages of Utility include remote maintenance service, firmware update, XSCF
reset, and XSCF switch (high-end systems only).
Note – This document does not provide details on the function of the remote
maintenance service. For details on setting and using the remote maintenance
service, see the manuals describing the remote maintenance service listed in
“SPARC
Enterprise Mx000 Servers Documentation” on page xxii .
TABLE 9-23 lists the functions for the firmware update. Select [Utility]-[Firmware
Update] in the Menu tree.
TABLE 9-23 Firmware Updating
Function Remarks
XCP version display Displays the XCP version.
This function is equivalent to the version (8)
command.
XSCF/OpenBoot PROM version display Displays the XSCF firmware and the OpenBoot
PROM firmware versions.
This function is equivalent to the version (8)
command.
XCP importing Import the XCP file into the server.
This function is equivalent to the getflashimage
(8) command.
Firmware update Update the firmwares of XCP.
This function is equivalent to the flashupdate (8)
command.
Version matching (high-end system only) Match the firmware versions of the two XSCF
Units. This is done when the XSCF Unit is replaced.
This function is equivalent to the flashupdate (8)
command.
To reset the XSCF, select [Utility]-[Reboot XSCF] in the menu tree. This function is
equivalent to the rebootxcf (8) command.
To switch the XSCF, select [Utility]-[Switch Over] in the menu tree. This function is
equivalent to the switchscf (8) command.