FUJITSU SPARC M4000 - Manual (Page 335)

Appendix B XSCF Log Information B-9
■ Power supply status (ON or OFF) of the server (Power).
B.4.3 Console Log
Using the showlogs (8) Command to Reference Console Logs
The XSCF firmware collects the domain console messages output through the XSCF
in a console log. A console log is collected as one entry for each line feed code. In
some cases, console logs may be called console message logs. Specify the console
option on the XSCF Shell and perform the showlogs (8) command to reference
console logs. The following items are displayed:
■ Domain ID (DomainID)
■ Time at which each console log was collected (Date). This is indicated in local
time.
■ Console message (Message)
B.4.4 Panic Log
Using the showlogs (8) Command to Reference Panic Logs
In case of panic, a console message is output to the domain console. This console
message is collected by the XSCF firmware in a panic log. In some cases, panic logs
may be called panic message logs. Specify the panic option on the XSCF Shell and
perform the showlogs (8) command to reference panic logs. The following items are
displayed:
■ Domain ID (DomainID)
■ Time at which each panic log was collected (Date). This is indicated in local time.
■ Panic message (Message)