FUJITSU SPARC M4000 - Manual (Page 305)

Chapter 9 How to Use the XSCF Web 9-11
Displaying System Status
TABLE 9-3 lists the functions for displaying the status of the entire system. Select
[Status]-[System Status] in the Menu tree.
TABLE 9-3 System Status Display
Function Remarks
Mode switch display Displays the mode switch status of the operator
panel.
This function is equivalent to the showhardconf
(8) command.
System time display This function is equivalent to the showdate (8)
command.
Failure component display This function is equivalent to the showstatus (8)
command.
Displaying temperature and humidity information This function is equivalent to the
showenvironment
(8) command.
The humidity is displayed in the high-end systems.
TABLE 9-4 lists the functions for displaying the status of a domain. Select [Status]-
[Domain Status] in the Menu tree.
TABLE 9-4 Domain Status Display
Function Remarks
Domain configuration information display Displays the XSB number corresponding to each
LSB number of each domain in the form of table.
Domain status display Configuration policy and domain power status are
displayed. This function is equivalent to the
showdcl
(8) command.
XSB information display This function is equivalent to the showdcl (8),
showboards
(8), and showstatus (8) commands.
TABLE 9-5 lists the function for displaying the status of CPU, memory, and I/O
devices in each XSB. Select [Status]-[Device Status] in the Menu tree.