FUJITSU SPARC M4000 - Manual (Page 158)

2-102 SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
Displaying the XSB Status
By referring to the XSB status of a domain, the user obtains information about an
XSB, such as whether its has been assigned and whether it has been recognized by
the OS. Such information also includes the current process and state of the XSB and
whether it was added or deleted successfully. The procedure for displaying status
information is shown below.
Note – To display the domain partitioning status, see Section 2.2.12, “System Board
Configuration” on page 2-113 .
■
Command operation
● Use the showboards (8) command to display XSB status information.
<Example 1> Display all XSB status information.
XSCF> showboards -va
XSB R DID(LSB) Assignment Pwr Conn Conf Test Fault COD
---- - -------- ----------- ---- ---- ---- ------- -------- ----
00-0 00(00) Assigned y y y Passed Normal n
00-1 00(01) Assigned y y y Passed Normal n
00-2 02(02) Assigned y y n Passed Normal n
00-3 03(03) Assigned y y n Passed Normal n
01-0 01(01) Assigned y y y Passed Normal n
01-1 01(02) Assigned y y y Passed Normal n
01-2 02(06) Assigned y y n Passed Normal n
01-3 03(07) Assigned y y n Passed Normal n
<Example 2> Display detailed information about XSB#00-0.
XSCF> showboards –v 00-0
XSB R DID(LSB) Assignment Pwr Conn Conf Test Fault COD
---- - -------- ----------- ---- ---- ---- ------- -------- ----
00-0 00(00) Assigned y y y Passed Normal n
<Example 3> Display XSB information about pooled XSBs and domain ID 0.
XSCF> showboards –c sp -d 0
XSB DID(LSB) Assignment Pwr Conn Conf Test Fault
---- -------- ----------- ---- ---- ---- ------- --------
00-0 SP Assigned n n n Passed Normal
Displaying or Specifying DCL Information
■
Command operation
1. Use the showdcl (8) command to display DCL information.