FUJITSU SPARC M4000 - Manual (Page 136)

2-80 SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
Enabling/Disabling the SNMPv1 and SNMPv2c Communication
■
Command operation
1. Use the showsnmp (8) command to display SNMP settings.
XSCF> showsnmp
2. Use the setsnmp (8) command to enable the SNMPv2c agent.
<Example 1> Enable SNMPv1 and SNMPv2c
XSCF> setsnmp enablev1v2c public
<Example 2> Disable SNMPv1 and SNMPv2c
XSCF> setsnmp disablev1v2c
3. Use the setsnmp (8) command to enable the SNMP agent.
XSCF> setsnmp enable
4. Use the setsnmp (8) command to confirm enabling/disabling of the SNMP.
XSCF> showsnmp
Setting the SNMPv1 and SNMPv2c Trap
■ Command operation
1. Use the showsnmp (8) command to display the SNMP settings.
XSCF> showsnmp
2. Use the setsnmp (8) command to set the SNMPv1 or SNMPv2c trap.
<Example> Specifying the type for SNMPv2c.
XSCF> setsnmp addtraphost -t v2 -s public host2
3. Confirm the SNMPv1 and SNMPv2c trap settings.
XSCF> showsnmp