FUJITSU SPARC M4000 User Manual
Page 245
Chapter 5 Overview of the XSCF Shell
5-9
When the SSH connection is done using a user key, install the user public key in
XSCF in advance. See
for instructions on how to install the user public
key.
The following example shows a login using a user public key:
[client]# ssh [email protected]
Enter passphrase for key ‘/home/nana/.ssh/id_rsa’:
xxxxxxx
Warning: No xauth data; using fake authentication data for X11
forwarding.
Last login: Mon Sep 1 10:19:37 2006 from client
XSCF>
5.2.4
Operation For Connecting Via the XSCF-LAN
(Telnet)
This section describes how to log in to XSCF via an XSCF-LAN (telnet) connection.
1. Enter the IP address or host name of XSCF and port number 23, and use telnet
via XSCF-LAN.
2. Enter a user account and password from the XSCF console.
3. Enter XSCF commands at the shell prompt (XSCF>) that is displayed after you
login to XSCF.
4. The following is a login example:
login:jsmith
Password:
xxxxxxxx
XSCF>