FUJITSU SPARC M4000 - Manual (Page 292)

8-22 SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
8.2.2 Method of Collecting the Log Information
The field engineers and authorized service personnel collect the log information.
Also, the system administrator might collect the log information.
To download the log information, execute the snapshot (8) command with some
options in the XSCF Shell. When the command is executed, all XSCF log information
is saved at the specified location.
Note – The download information by using the snapshot (8) command does not
include log archives. The archived logs are stored on the archive host. The log
archives can be accessed by logging in to the archive host.
The log can be saved in the device using one of the following two methods.
■ The log information can be saved when a USB device has been connected to the
USB connector mounted on the XSCF Unit front panel.
■ The log data is transmitted through the network with an encryption protocol.
Note – The USB device connected locally is only for the download of data. The USB
device should only be formatted using the FAT32 file system. Please ask authorized
service personnel about the USB capacity and the handling of USB devices.
Note – The snapshot (8) command can encrypt collected data by specifying an
option. If you collect the data, be sure to ask the authorized service personnel to
collect only the log file, the encryption information, and the method of sending the
log file.
The following is the procedure for saving logs.
Saving the Logs by Connecting the USB Device for Exclusive Use to the
Front Panel of the XSCF Unit
■
Web browser operation
1. Select the snapshot (Note) menu for saves of the logs menu and display the
saving operation page.
2. Connect a USB device to the USB connector mounted on the XSCF Unit front
panel.
3. In the window, select the USB device on the XSCF Unit front panel.