FUJITSU SPARC M4000 - Manual (Page 102)

2-46 SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
Changing Stratum Value for XSCF
■ Command operation
1. Use the showntp (8) command to display the stratum value for the XSCF
network.
XSCF> showntp -s
stratum : 5
2. Use the setntp (8) command to change a stratum value.
<Example> Set 7 as stratum value for XSCF network.
XSCF> setntp -c stratum -i 7
Please reset the XSCF by rebootxscf to apply the ntp settings.
Note – When you use the setntp (8) command to specify the stratum value,
execute the rebootxscf (8) command to apply the specified configuration and reset
the XSCF.
3. Use the showntp (8) command to confirm the stratum value change.
XSCF> showntp -s
stratum : 7
Setting the Domain Time to the XSCF Time
■ Command operation
1. Use the Solaris OS date (1M) command to display the domain time.
2. Use the showdate (8) command to display the XSCF time and to confirm the
difference with the domain time.
XSCF> showdate
Mon Jan 23 14:53:00 JST 2006
3. Use the poweroff (8) command to turn off power to all domains.