FUJITSU SPARC M4000 - Manual (Page 283)

XSCF> version -c xcp -v
XSCF#0 (Active)
XCP0 (Current) : 1010
OpenBoot PROM : 01.01.0001
XSCF : 01.01.0001
XCP1 (Reserve) : 1010
OpenBoot PROM : 01.01.0001
XSCF : 01.01.0001
OpenBoot PROM BACKUP
#0 : 01.01.0001
#1 : 01.01.0001
Chapter 8 Upgrade of XSCF Firmware and Maintenance 8-13
b. Use the flashupdate (8) command to confirm whether to be able to update
the new firmware version.
XSCF> flashupdate -c check -m xcp -s 1020
c. Use the flashupdate (8) command to update the firmware.
<Example> Update XCP from an early version, 1010, to the newer 1020 version.
XSCF> flashupdate -c update -m xcp -s 1020
The XSCF will be reset. Continue? [y|n] :y
Checking the XCP image file, please wait a minute
XCP update is started (XCP version=1020:last version=1010)
OpenBoot PROM update is started (OpenBoot PROM version=01010001)
OpenBoot PROM update has been completed (OpenBoot PROM version=01010001)
XSCF update is started (XSCFU=0, bank=1, XCP version=1020:last version=1010)
XSCF download is started (XSCFU=0, bank=1, XCP version=1020:last version=1010,
Firmware Element ID=00:version=01010002:last version=01010001)
XSCF download has been completed (XSCFU=0, bank=1, XCP version=1020:last
version=1010, Firmware Element ID=00:version=01010002:last version=01010001)
:
XSCF update is started (XSCFU=0, bank=0, XCP version=1020:last version=1010)
XSCF download is started (XSCFU=0, bank=0, XCP version=1020:last version=1010,
Firmware Element ID=00:version=01010002:last version=01010001)
XSCF download has been completed (XSCFU=0, bank=0, XCP version=1020:last
version=1010, Firmware Element ID=00:version=01010002:last version=01010001)
:
XSCF is rebooting to update the reserve bank