FUJITSU SPARC M4000 - Manual (Page 141)

Chapter 2 Setting Up XSCF 2-85
Specifying the Host Name, Port Number, and Reply Address of the
SMTP Server
■
Command operation
1. Use the showsmtp (8) command to display SMTP server setting information.
XSCF> showsmtp
Mail Server:
Port: 25
Authentication Mechanism: none
Reply address:
2. Use the setsmtp (8) command to set SMTP server setting information.
<Example 1> Specifying a host name, port number, reply address and
SMTP authentication
XSCF> setsmtp -s mailserver=192.1.4.5 -s port=25 -s replyaddress=
[email protected] -s auth=smtp-auth -s usr=usr001 -s password=
xxxxxxxx
<Example 2> Specifying a host name, port number, reply address and
POP authentication
XSCF> setsmtp
Mail Server [192.1.4.2]: 192.1.4.5
Port[25]:
Authentication Mechanism [none]:pop
POP Server [192.1.4.2]:
User Name []: usr001
Password []: xxxxxxxx
Reply Address [[email protected]]:
Display mail
settings Displays mail report function setting
information. showemailreport
Enable/
Disable
Enables or disables the mail report
function. setemailreport The default setting is
"Disable."
Recipient
address Sets the recipient address for a mail
message to be sent to the system
administrator. setemailreport Multiple addresses can be
specified to up to 255
characters, by using a
comma as the delimiter.
TABLE 2-18 Mail Administration (Continued)
Item Description
Shell
Command Remarks