Figure 3-2 – FUJITSU SPARC M4000 User Manual
Page 197
Advertising
Chapter 3 Connecting to the XSCF and the Server
3-7
shows an example with settings.
FIGURE 3-2
Example of Terminal Software Settings
Note –
Please increase the delay, when you cannot connect.
3. On the PC or workstation to be used, use one of the following procedures:
■
Connecting the XSCF Shell terminal
a. Establish a connection via the serial port to use the XSCF Shell terminal.
b. Enter an ID and password to start the XSCF Shell.
c. Confirm that the XSCF Shell prompt (XSCF>) is displayed.
Advertising