FUJITSU SPARC M4000 User Manual

Page 142

Advertising
background image

2-86

SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008

3. Check the SMTP server setting information.

XSCF> showsmtp

Mail Server: 192.1.4.5

Port: 25

Authentication Mechanism : pop

User Name: usr001

Password: ********

Reply Address: [email protected]

Enabling or Disabling the Mail Report Function and Specifying the
Recipient Address Used for Notification

■

Command operation

1. Set the SMTP server as described in

Specifying the Host Name, Port Number,

and Reply Address of the SMTP Server

. Use the showemailreport (8)

command to display mail report setting information.

XSCF> showemailreport

E-Mail Reporting: disabled

2. Use the setemailreport (8) command to set mail report information.

<Example> Enabling the mail report function and specifying a reply

addresses

XSCF> setemailreport

Enable E-Mail Reporting? [no]: yes

E-mail Recipient Address []: [email protected]

Do you want to send a test mail now [no]?: yes

... Sending test mail to '[email protected]'

3. Use the showemailreport (8) command to confirm mail report setting

information.

XSCF> showemailreport

E-Mail Reporting: enabled

Recipient Address: [email protected]

4. Confirm the test mail by checking if an email with the subject "Test Mail" was

received.

Advertising