FUJITSU SPARC M4000 - Manual (Page 135)

Chapter 2 Setting Up XSCF 2-79
3. Confirm the SNMPv3 trap settings.
XSCF> showsnmp
Agent Status: Enabled
Agent Port: 161
System Location: MainTower21F
System Contact: [email protected]
System Description: DataBaseServer
Trap Hosts:
Hostname Port Type Community String Username Auth Protocol
-------- ---- ---- ---------------- -------- -------------
host3 162 v3 n/a yyyyy SHA
host1 62 v1 public n/a n/a
host2 1162 v2 public n/a n/a
SNMP V1/V2c:
Status: Enabled
Community String: public
Enabled MIB Modules:
SP MIB
FM MIB
Disabling Traps to the Target Host of SNMPv3
■
Command operation
1. Use the showsnmp (8) command to display SNMP settings.
XSCF> showsnmp
2. Use the setsnmp (8) command to disable the trap destination host of the
SNMPv3 target.
XSCF> setsnmp remv3traphost -u yyyyy host3
3. Use the showsnmp (8) command to confirm that the trap destination host has
been disabled.
XSCF> showsnmp