FUJITSU SPARC M4000 - Manual (Page 253)

Chapter 5 Overview of the XSCF Shell 5-17
exit
The exit (8) command ends the XSCF Shell.
version
The version (8) command displays the comprehensive firmware version (XCP
version, see Note) of the XSCF firmware and POST/OpenBoot PROM firmware. The
system administrator can display version information when upgrading firmware.
Note – XCP: XSCF Control Package that includes the programs which control the
hardware components making up a computer system.
5.9 View XSCF Shell Error Messages
TABLE 5-2 lists the typical messages from each XSCF Shell command.
TABLE 5-2 Error Messages of XSCF Shell Commands
Message Meaning
Invalid parameter. An abnormal parameter error has occurred.
Operation failed. Abnormal end.
Permission denied. An execution authority error has occurred.
Operation not supported on this system. Unsupported function.
Operation interrupted. Processing interruption from user.
The current configuration does not support this
operation. Abnormal configuration.
A hardware error occurred. Please check the error log
for details. A hardware error has occurred.
An internal error has occurred. Please contact your
system administrator. An XSCF internal error has occurred.
Note – The error message depends on the command. Therefore, you will
occasionally see more messages.