FUJITSU SPARC M4000 - Manual (Page 246)

5-10 SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
5.3 View Server Status and Control
Commands
This section describes the typical XSCF Shell commands that can be used to display
the server status, operate the server, and control the server. For details on the
commands, see the man page or the XSCF Reference Manual.
■ showenvironment
■ showlocator/setlocator
■ showconsolepath
■ fmadm / fmdump / fmstat
■ showdomainstatus
■ reset / poweron / poweroff
■ sendbreak
showenvironment
The showenvironment (8) command displays the values of all sensors in the server.
By finding out the intake temperature, humidity, voltage, and fan rotation speed in
the server, the system administrator can check for errors in the system environment.
showlocator/setlocator
These commands display status information indicated by the LEDs on devices and
the operator panel of the server. Finding out information on device errors is helpful
in component degradation and replacement. Also, the system administrator can use
the commands to identify the target device among many devices.
showconsolepath
The showconsolepath (8) command displays the operating status of the domain
console. By finding out the users of domain consoles, the system administrator can
notify the users before a user performs a server operation or server control.