FUJITSU SPARC M4000 - Manual (Page 240)

5-4 SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
setarchiving Configures the log archiving function of XSCF.
showarchiving Displays the settings of the log archiving function of XSCF.
setaudit Configures the auditing of XSCF.
showaudit Displays the settings of the audit of XSCF.
viewaudit Displays the audit records (Audit trail) of XSCF.
setsnmp Configures the SNMP Agent.
showsnmp Displays the SNMP Agent settings.
setsnmpusm Configures the USM management information for the SNMP agent.
showsnmpusm Displays the USM management information for the SNMP agent.
setsnmpvacm Configures the VACM management information for the SNMP agent.
showsnmpvacm Displays the VACM management information for the SNMP agent.
setdcl Specifies the domain configuration information (DCL).
showdcl Displays the domain configuration information.
showboards Displays the component information and the COD information about a system
board.
showdevices Displays the domain information specified for a system board.
showdomainstatus Displays the domain status.
setupfru Specifies the number of XSB partitions of the system board and sets the memory
mirror mode.
showfru Displays the specified number of XSB partitions of the system board and the
memory mirror mode that is set.
testsb Diagnoses the system board.
addboard Adds a system board to a domain.
deleteboard Deletes a system board from a domain. Alternatively, it reserves a delete to the
system board. If the deletion is reserved, the deletion is done after OS reboot.
moveboard Moves a system board to another domain. Alternatively, it reserves a move to the
system board. If the movement is reserved, the deletion is done after OS reboot of
source domain, and the assignment to the new domain is done.
replacefru Replaces a FAN unit, PSU, panel, system board, XSCF Unit, or IO-BOX in work
performed according to the applicable guide.
addfru Installs a FAN unit, PSU, system board, or IO-BOX in work performed according to
the applicable guide.
deletefru Removes a FAN unit, PSU, system board, or IO-BOX in work performed according
to the applicable guide.
TABLE 5-1 XSCF Commands (Continued)
Command Description