FUJITSU SPARC M4000 - Manual (Page 286)

8-16 SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
Updating XCP From External Media
1. Insert the external media with the XCP file into the drive. Insert the external
media into a drive connected to the network that XSCF has access to. If
necessary, copy the XCP file to an arbitrary folder.
2. Confirm the XCP version in the XCP file (tar.gz) of external media. The latest
XCP information is released on external media or a web site. To obtain the
URL of the web site, see the description of the firmware download in
“Preface”
on page xix .
3. Perform the same steps in Updating XCP From the Network .
Confirm That the OpenBoot PROM Firmware is Updated When a CMU
Has Been Added or Replaced
1. After a CMU addition or replacement task and an allocation to a domain have
completed, turn on power to the domain. The update of the OpenBoot PROM
firmware is automatically performed at this time (automatic matching of
versions).
2. Confirm that the firmware version of the target domain agrees with the version
of the XSB firmware allocated to the added or replacement CMU.
■ Command operation
a. Execute the version (8) command, and confirm it.
XSCF> version -c cmu
DomainID 0 : 01.01.0001
DomainID 1 : 01.01.0001
:
DomainID 3 : 01.01.0001
■ Web browser operation
a. Display the "Firmware Update" menu.
b. Display the OpenBoot PROM firmware version, and confirm it.
Confirming That the XSCF Firmware is Updated When an XSCF Unit
Has Been Replaced (There Are Redundant XSCF Units)
a. Operation in State of the Input Power On