FUJITSU SPARC M4000 - Manual (Page 217)

Chapter 4 Operation of the Server 4-9
■ sendbreak
■ setpowerupdelay
■ showpowerupdelay
■ setshutdowndelay
■ showshutdowndelay
■ setdualpowerfeed
■ showdualpowerfeed
With the power operations, the following can be performed:
■ System power on
■ System power off
■ Domain power on
■ Domain power off
■ Sending a Domain Panic Request (Domain OS dump)
■ Domain reset
■ Sending break signal to a domain
■ Air-conditioning wait time administration
■ Warm-up time administration
■ Dual power feed
4.4.1 System Power On
■
Command operation
1. Use the showdomainstatus (8) command to check the power status of the
system.
XSCF> showdomainstatus -a
DID Domain Status
00 Running
01 Powered Off
02 Powered Off
03 Powered Off