FUJITSU SPARC M4000 User Manual
Page 332
Event
Meaning
SCF Reset:
The XSCF was reset.
Domain Power ON:
The domain power supply was turned on.
Domain Power OFF:
The domain power supply was turned off.
System Power ON:
The power supply of the server common section was turned on.
System Power OFF:
The power supply of the server common section was turned off.
XIR:
The XIR was reset.
Domain Reset:
The domain was reset.
B-6
SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
Factor by which the power event was instructed (Cause). The causes and their
meanings are as follows:
Cause
Meaning
Self Reset:
Self-resetting of the XSCF reset the XSCF.
Power On:
Turning on the input power supply reset the XSCF.
System Reset:
The detection of an error reset the XSCF.
Panel:
Operating a switch on the operator panel caused a power event.
Scheduled:
Setting the TOD timer caused a power event.
RCI:
The ID device connected to the RCI caused a power event.
AC Restored:
Power recovery turned on the power supply.
Operator:
An operator's instruction caused a power event.
Poweron Restart:
Retrying power on operation turned on the power supply.
Power Failure:
A power interruption cut off the power supply.
SW Request:
An OS instruction caused a power event.
Alarm:
The server environment or a hardware fault caused a power event.
Fatal:
Fatal caused a power event.
Panic:
Panic caused a power event.
■
Domain ID for power event (DID)
■
Mode switch status on the operator panel (Switch). The following lists the
switches and their meanings: