FUJITSU SPARC M4000 - Manual (Page 148)

2-92 SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
Note – FRU; Field-Replaceable Unit.
Note – One domain can use up to 16 LSBs. The user can define the different XSB in
each LSB by using XSCF. Also, multiple domains can assign LSBs to the same XSB. If
multiple domains assign them to the same XSB, however, the domains not using that
XSB are in a state (Unconfigured) that does not allow them to use the XSB until the
domain using it (Assigned or Configured) releases it.
Caution – IMPORTANT - When you set the DCL, please make the settings after the
domain has powered off.
TABLE 2-23 lists the XSB status information. This information can be displayed by the
showboards (8) command.
TABLE 2-23 XSB Status Information
Parameter Explanation
XSB number XSB number.
DID Domain ID.
LSB LSB number that is used for domain.
assignment
(Assignment) Status of pre-arranged registration in a domain
unavailable:
• XSB not yet mounted or assigned.
• XSB not yet configured.
available: ..... XSB in the system board pool state.
assigned: ..... XSB assigned to the domain.
power
(Pwr) Indicates the XSB power status.
n: ..... XSB power off state
y: ..... XSB power on state
connectivity
(Conn) Indicates the state of a hardware connection to a domain.
n: ..... System board pool state
The XSB has been deleted from the domain by hardware. (This includes a domain
shutdown.)
y: ..... XSB connected by hardware to the domain.
(The XSB is active in the domain or ready to be added to the OS.)
configuration
(Conf) Status of a logical connection to a domain.
n: ..... Not added to the domain (OS).
y: ..... Active and added to the domain (OS).