FUJITSU SPARC M4000 - Manual (Page 167)

Chapter 2 Setting Up XSCF 2-111
3. Use the showdcl (8) command to confirm the DCL information.
XSCF> showdcl –a
DID LSB XSB Status
01 Powered Off
00 00-0
01 01-1
02 01-2
03 01-3
------------------------------------------
02 Powered Off
00 00-0
07 01-0
08 01-1
09 01-2
10 01-3
4. Use the showboards (8) command to display XSB status information.
XSCF> showboards –va
XSB R DID(LSB) Assignment Pwr Conn Conf Test Fault COD
---- - -------- ----------- ---- ---- ---- ------- -------- ----
00-0 02(00) Assigned n n n Passed Normal n
01-0 02(07) Assigned n n n Passed Normal n
01-1 SP Available n n n Passed Normal n
01-2 02(09) Assigned n n n Passed Normal n
01-3 02(10) Assigned n n n Passed Normal n
5. Use the moveboard (8) command to move an XSB.
<Example> Delete XSBs and make XSB assignment to new domain.
XSCF> moveboard -c assign -d 1 1-0
XSB#01-0 will be assigned to DomainID 1 immediately. Continue?[y|n]
:y
XSCF>