FUJITSU SPARC M4000 - Manual (Page 232)

4-24 SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
Processing Continued at Failover
In case the failover was generated while the following processes are executing, the
process will be continued:
■ Domain power-on process
■ Domain power-off process
■ DR function
Caution – IMPORTANT - In case an XSCF failover is generated, the setting may
not have been completed. Log in to the active side XSCF again to confirm whether or
not the setting was applied. If the setting was not applied, perform the setting
operation again.
4.9 Displaying State of an External I/O
Expansion Unit and Administration
This section describes the management overview of an External I/O expansion unit
connected to the server, components in the External I/O Expansion Unit (I/O
boards, link cards, and power supply units<PSUs>), and downlink cards mounted in
PCI slots in the server.
Note – For the hardware configuration of an External I/O Expansion Unit, see the
External I/O Expansion Unit Installation and Service Manual or the Service Manual for
your server. For details and examples of use of commands, see the XSCF Reference
Manual and the ioxadm (8) man page.