FUJITSU SPARC M4000 User Manual
Page 114
<Example 1> Enable https.
XSCF> sethttps -c enable
Continue? [y|n] : y
Please reset the XSCF by rebootxscf to apply the https settings.
<Example 2> Disable https
XSCF> sethttps -c disable
2-58
SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
3. To enable the https, the XSCF reset is required. Use the rebootxscf (8)
command to reset the XSCF.
XSCF> rebootxscf
The XSCF will be reset. Continue? [y|n] :y
■
After the XSCF reset, the XSCF session is disconnected. Please log in again to the
XSCF.
Importing a Web Server Certificate by Using the External CA or CA in
Intranet
■
Command operation
1. Use the sethttps (8) command to create a web server private key.
XSCF> sethttps -c genserverkey
Server key already exists. Do you still wish to update? [y|n] :y
Enter passphrase:
xxxxxxxx
Verifying - Enter passphrase:
xxxxxxxx
2. Use the sethttps (8) command to create the CSR specifying the distinguished
name (DN). (See the DN description in "External authentication" in
.)
<Example> Specify the DN (JP, Kanagawa, Kawasaki, Example,
Development, scf-host, [email protected])
XSCF> sethttps -c gencsr JP Kanagawa Kawasaki Example Development
scf_host [email protected]
3. Use the sethttps (8) command to display the CSR. Copy the displayed CSR
(BEGIN to END) and save it in the text file.