FUJITSU SPARC M4000 - Manual (Page 190)

<Example 1> Display COD board information.
XSCF> showboards -va
XSB R DID(LSB) Assignment Pwr Conn Conf Test Fault COD
---- - -------- ----------- ---- ---- ---- ------- -------- ----
00-0 00(00) Assigned y y y Passed Normal n
00-1 00(01) Assigned y y y Passed Normal n
<Example 2> Display COD license reservation information.
XSCF> showcod
Chassis HostID: 80e3e446
PROC RTUs installed: 10
PROC Headroom Quantity: 0
PROC RTUs reserved for domain 0: 4
PROC RTUs reserved for domain 1: 0
PROC RTUs reserved for domain 2: 0
PROC RTUs reserved for domain 3: 0
2-134 SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
2. Use the setcod (8) to specify the headroom quantity, to specify the licenses
reserved for domains.
<Example> Specify 4 for headroom quantity, reserve 3 for domain ID
0 and reserve 0 for other domains.
XSCF> setcod
PROC RTUs installed : 8
PROC Headroom Quantity (0 to disable, 4 MAX) [0] : 4
PROC RTUs reserved for domain 0 (10 MAX) [0] : 3
PROC RTUs reserved for domain 1 (7 MAX) [0] : 0
PROC RTUs reserved for domain 2 (9 MAX) [2] : 0
PROC RTUs reserved for domain 3 (7 MAX) [0] : 0
3. Use the showcod (8) command to confirm the information license resevation.
XSCF> showcod
Chassis HostID: 80e3e446
PROC RTUs installed: 8
PROC Headroom Quantity: 4
PROC RTUs reserved for domain 0: 3
PROC RTUs reserved for domain 1: 0
PROC RTUs reserved for domain 2: 0
PROC RTUs reserved for domain 3: 0