FUJITSU SPARC M4000 - Manual (Page 192)

3-2 SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
3.1.1 Terminal Operating Modes for Connection to
XSCF
The FIGURE 3-1 shows the terminal operating modes for connecting to XSCF.
FIGURE 3-1 Operating Modes for Connection to XSCF (In Midrange Systems)
SSH/telnet/
https
connection
SSH/telnet/
https
connection
Mail
notification Router
XSCF-LAN
Ethernet connection
Connection to the
serial port
Terminal
Terminal
Terminal
Server
:
User
LAN
Domain
Domain
XSCF
Note – In the systems with two XSCF Units (high-end systems), the number of
actual XSCF-LAN and serial ports is twice that of the system with one XSCF Unit.
3.1.2 Port and Terminal Types Connected to the XSCF
As shown in FIGURE 3-1 , two types of ports (serial, Ethernet) can be used for
connecting to the XSCF and the XSCF terminal. Connect cables to the appropriate
connectors, log in to XSCF from the XSCF terminal, and then perform the console