FUJITSU SPARC M4000 - Manual (Page 317)

Chapter 9 How to Use the XSCF Web 9-23
TABLE 9-21 lists the functions for configuring COD. Select [Setting]-[Capacity on
Demand] in the Menu tree.
TABLE 9-21 COD Configuration
Function Remarks
COD resource use status display and headroom
configuration Displays the current use status of COD resources in
a resource, and displays and sets the headroom
quantity in the server.
These functions are equivalent to the
showcodusage
(8), showcod (8), and setcod (8)
commands.
COD management information for each domain’s
display and setting Displays the current use status of COD resources in
a domain, and displays COD license reservation
infomration and reserves a COD license to a
domain.
These functions are equivalent to the
showcodusage
(8), showcod (8), and setcod (8)
commands.
License information display, and license
addition/deletion Displays COD license setting information, and
adds a license key to or deletes a license key from
the COD license database for XSCF.
These functions are equivalent to the
showcodlicense
(8), addcodlicense (8), and
deletecodlicense (8) commands.
TABLE 9-22 lists the functions for configuring the authentication timeout period for
XSCF Web console. Select [Settings]-[Autologout] in the Menu tree.
TABLE 9-22 Auto Logout Configuration (XSCF Web)
Function Remarks
Timeout period display and configuration After logging in XSCF, if the system is not used for
a certain period, logout is automatically performed.
Displays and specifies the timeout period in
minutes.
The authentication timeout is 10 minutes by
default. The monitoring interval ranges from 1 to
255 minutes.