FUJITSU SPARC M4000 - Manual (Page 98)

2-42 SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
Specifying a Time Zone
■
Command operation
1. Use the showtimezone (8) command to display the time zone.
XSCF> showtimezone -c tz
America/Chicago
NTP server Configures an NTP server for XSCF
network. (In this case, XSCF is an NTP
client.)
Specify the IP address or host name of an
NTP server.
You can synchronize with up to three NTP
servers. setntp No default setting has been
specified.
If the same IP address as
DSCP is set, an error will
occur.
Stratum
value Specifies a stratum service for XSCF.
You can specify an integer from 1 to 15. setntp The default stratum value
is 5.
Reset time
subtraction Resets the time subtraction between the
XSCF and each domain, which is stored in
XSCF.
As a result, the time of each domain will be
set to the same time as the XSCF after
startup. resetdateoffset The settings can be enabled
when all of the domains are
powered off.
TABLE 2-7 Setting Time and Date (Continued)
Item Description Shell Command Remarks