FUJITSU SPARC M4000 - Manual (Page 27)

Preface xxv
7. Provided In firmware program CD (For maintenance service <for FEs>)
i. Firmware program file (XSCF Control Package (XCP) file)
ii. XSCF extension MIB definition file
8. Information on Using the RCI function
The manual does not contain an explanation of the RCI build procedure. For
information on using the RCI function, refer to the SPARC Enterprise
M4000/M5000/M8000/M9000 Servers RCI Build Procedure and the SPARC Enterprise
M4000/M5000/M8000/M9000 Servers RCI User’s Guide available on the website.
Abbreviated References to Other
Documents
In this manual, the following abbreviated titles may be used when referring to a
systems manual. The following table lists the abbreviations used in this manual.
Abbreviated Title Full Title
Overview Guide SPARC Enterprise M4000/M5000 Servers Overview Guide
SPARC Enterprise M8000/M9000 Servers Overview Guide
Service Manual SPARC Enterprise M4000/M5000 Servers Service Manual
SPARC Enterprise M8000/M9000 Servers Service Manual
Installation Guide SPARC Enterprise M4000/M5000 Servers Installation Guide
SPARC Enterprise M8000/M9000 Servers Installation Guide
Administration Guide SPARC Enterprise M4000/M5000/M8000/M9000 Servers
Administration Guide
XSCF Reference Manual SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF
Reference Manual
Dynamic
Reconfiguration User’s
Guide
or DR User’s Guide SPARC Enterprise M4000/M5000/M8000/M9000 Servers
Dynamic Reconfiguration (DR) User’s Guide
COD User’s Guide SPARC Enterprise M4000/M5000/M8000/M9000 Servers
Capaicty on Demand (COD) User’s Guide
Glossary SPARC Enterprise M4000/M5000/M8000/M9000 Servers
Glossary