Quantum Data 881 User Manual

Page 1233

Advertising
background image

881/882 Video Test Generator User Guide

(Rev A.22)

APG

2717

Sync swing out of range

The generator hardware configuration does not support the video format’s analog video
composite sync swing value (ASSS setting) for the given analog video type selection.

2719

Video swing calibration out of range

The generator hardware configuration does not support the current user defined analog
video swing calibration factors (AVSC settings) for one or more of the red, green or blue
channels. The valid factory default setting is 1.00 for all three channels.

2720

Sync swing calibration out of range

The generator hardware configuration does not support the current user defined analog
video composite sync swing calibration factors (ASSC settings) for one or more of the red,
green or blue channels. The valid factory default setting is 1.00 for all three channels.

2721

NTSC TV signals require blanking pedestal

The generator hardware configuration does not support producing NTSC TV video outputs
that do not use a blanking pedestal (AVPG setting of 0) as required by the NTSC
specifications.

2722

Blanking pedestal out of range for NTSC TV signal

The generator hardware configuration does not support producing NTSC TV video outputs
that do not use a nominal blanking pedestal level (AVPS setting) of 7.5 IRE as required by
the NTSC specifications.

2741

Digital video signal type not supported

The generator hardware configuration does not support any type of digital video outputs.

2742

Invalid digital video signal type

The current firmware does not support the format’s digital video type selection (DVST
setting).

2743

Digital video polarity not positive

The generator hardware configuration and/or the firmware does not support digital video
formats having a logic low level for the active (lit) pixels.

2745

Can not have analog AND digital video

The generator hardware configuration does not support the simultaneous generation of
analog and digital video signals.

2747

Invalid analog video signal type

The current firmware for a given model generator does not support the video format’s
analog video type selection.

Advertising
This manual is related to the following products:

882