Quantum Data 881 - Manual (Page 584)

566 Chapter 16 Testing EDID
Running an EDID data report
You can run the EDID data report in an HDMI EDID that is loaded into the EDID Editor.
This function generates an HTML report that appears in the window when compete. The
procedures below provide instructions on running the EDID data report from the EDID
Editor.
To run an EDID data report:
1. Load an existing EDID using the procedures described in “ Loading EDIDs ” on page
547.
2. Select Generate/View Compliance Test from the Tools pull down menu as shown
below.
The EDID report appears in the window.