Quantum Data 881 - Manual (Page 66)

48 Chapter 2 Testing Video Displays
Once you have selected an image you can modify the image options if necessary. For
instructions on this refer to “
Viewing and modifying image options ” on page 201.
To select an image:
1. Identify the type of display (CRT or FPD) and the images that are used for testing this
type of display (see the table below).
2. Press the Content key. A list of images appears on the generator’s display as shown
below. Press the + and - keys to see all of the images.
Note: The list of images that appears when you press the Content key may be a
filtered or abbreviated list. You may have disabled certain image catalogs, preventing
the images in those catalogs from appearing on the Content list. For more information
about image catalogs, see “
Creating image catalogs ” on page 211.
3. Choose an image by pressing the adjacent soft key.
Acer1 Acer2
Acer3 Acer4
Acer5 Acer6
Acer7 Acer8