Quantum Data 881 - Manual (Page 279)

881/882 Video Test Generator User Guide (Rev A.22) 261
Note: Be sure that you have transferred any existing pixel error reports to your PC
otherwise generating a new report will overwrite the existing report.
9. Choose the Settings item by pressing the adjacent soft key or press the Settings key.
The pixel error testing settings appear on the generator’s display as shown below.
Press the soft keys adjacent to the arrows to see all of the settings.
10. Refer to the table below to locate the setting you want to change. For more information
about a setting,
To change a setting value:
a. Position the blinking cursor on the value you want to change. To do this, press the
soft key adjacent to the arrow by the setting value to move the cursor left or right
until it appears on the digit you want to change.
b. Adjust the value of the setting up or down by pressing the + or - keys.
c. To save the changes, press the Enter (Options) key, and then press the soft key
next to Yes.
11. To save the changes, press the Enter (Options) key. The following choices appear on
the generator’s display:
To save the changes, choose the Yes item by pressing the adjacent soft key.
To exit without saving the changes, choose the No item.
To return to the parameters screen without saving the changes, choose the Back item.
12. Generate a static image from the HDMI/DVI transmit device.
Setting Description
Analysis Duration
Frames Sets the number of frames to analyze(1-99999999).
Report Recorded
Errors
Max Sets the maximum number of errors to record (1-9999)
Analysis
Duration
1
Frames
→
→
Apply Settings?
Back
Yes No