Quantum Data 881 - Manual (Page 493)

881/882 Video Test Generator User Guide (Rev A.22) 475
DPRX:LLCT? 4 3 // Runs the link layer compliance test 4:(4.2.2.3)
“ EDID Read ” three times.
To run the Link Layer compliance test on DisplayPort sinks (receiver) through the
GUI:
1. Connect a cable between the DisplayPort Rx connector on the 882E and the device’s
DisplayPort transmitter interface with the DisplayPort function.
The following diagram depicts the test setup:
2. Setup the 882 for DisplayPort testing. Refer to “ Setting up the 882 for DisplayPort
testing: ” on page 454.
'LVSOD\3RUW/LQN/D\HU 'LVSOD\3RUW/LQN/D\HU
6RXUFH
7UDQVPLWWHU
'87
6LQN
(
'LVSOD\3RUW5[