Quantum Data 881 - Manual (Page 172)

154 Chapter 4 Networking Generators
3. Copy the contents of the 882 folder to the FTP site folder. The resulting folder structure
is shown below.
Removing current files from the generators
Prior to upgrading the generators, you must remove the existing system and firmware file,
gateware, and resource files from the flash memory of each generator. For instructions on
removing files from the generator, see “
Upgrading the generator locally ” on page 109. If
you are also installing the new files on the generator’s PC card, you must also remove the
current files from the PC card.
Copying the new files to each generator
Now you are ready to copy the new, updated system and firmware, gateware, and library
resource files to the generators to complete the upgrade. See “
Working with the Generator
FTP Browser ” on page 24 for instructions.
Reboot the generators
The upgrade is now complete and you are ready to reboot the generators from the
updated system files you just copied to each generator’s flash memory. Reboot each
generator by cycling the power.