Quantum Data 881 - Manual (Page 545)

881/882 Video Test Generator User Guide (Rev A.22) 527
6. Set characteristics of the display under test using CDF parameters. Scroll through the
list by pressing the + key.
These parameters are used when the compliance tests are run. The following table
describes the parameters and their settings.
Parameter Explanation
HDMI Output Count The number of outputs the sink under test has. It is a
value in the range of 0-9.
HDMI Input Port The CEC input on the sink under test. It is a value in the
range of 1-15.
CEC Root Device Indicates if the CEC device is a root device (i.e. a TV
without a repeater). The values are + for yes and - for no.
Primary AR: 4:3 Indicates the primary aspect ratio of the sink device
under test. This can be either 4:3, 16:9 or both. The val-
ues are + for yes and - for no.
HDTV Indicates if the sink under test supports HDTV. The val-
ues are + for yes and - for no. The values are + for yes
and - for no.
YUV on Other Indicates if the sink under test supports YUV. The val-
ues are + for yes and - for no. The values are + for yes
and - for no.
60Hz Indicates whether the device supports formats with
60Hz frame rate. The values are + for yes and - for no.
50Hz Indicates whether the sink under test supports formats
with 50Hz frame rate. The values are + for yes and - for
no.
640x480p/60 Indicates whether the sink supports the DMT0660 for-
mat. The values are + for yes and - for no.
720x480p/60 4:3 Indicates whether the sink supports the 480p60 format
with a 4:3 aspect ratio. The values are + for yes and - for
no.
720x480p/60 16:9 Indicates whether the sink supports the 480p60SH for-
mat with a 16:9 aspect ratio. The values are + for yes
and - for no.
1280x720p/60 16:9 Indicates whether the sink under test supports the
720p60 format. The values are + for yes and - for no.
1920x1080i/60 16:9 Indicates whether the sink under test supports the
1080i60 format. The values are + for yes and - for no.
1440x480i/60 4:3 Indicates whether the sink under test supports the
480i2x60 format with double clocking at 4:3 aspect ratio.
The values are + for yes and - for no.
1440x480i/60 16:9 Indicates whether the sink under test supports the
480i2x60 format with double clocking at 16:9 aspect
ratio. The values are + for yes and - for no.