Quantum Data 881 - Manual (Page 44)

26 Chapter 1 Getting Started
Copying files from a generator to a PC
To copy files from a generator to a PC:
1. Access the generator’s FTP browser by choosing the FTP Browser menu item from the
main web page. The Generator FTP Browser appears. The Instrument Files area
shows the files stored on the generator. The Host Files area shows the files stored on
the PC.
2. In the Instrument Files area, locate and select the file or folder you want to copy as
follows.
a. In the Look in box, click the down arrow and select the medium where the file is
located. Select tffs0 for the generator’s flash memory or card0 for the generator’s
PC card.
b. In the list of files, select the file or folder you want to copy.
3. In the Host Files area, open the destination folder where you want to copy the files.
4. In the Instrument Files area, click Upload. The Transfer Files dialog box appears.