Quantum Data 881 - Manual (Page 298)

280 Chapter 9 Analyzing Digital Sources and Cables
XVSI 4 (or 3) // Selects the HDMI-H or HDMI-D interface
ALLU // Applies the interface setting to the generator
5. Enter the following commands to load a valid HDMI or DVI format into the analyzer.
FMTL DMT0660 // loads the DMT0660 (e.g.) format into the edit buffer
FMTU // applies the format to the generator/analyzer
6. Enter the following commands to setup the measurement of pixel data.
PDAX:CAPF //captures a frame of pixel data for the pixel
data analysis test
7. Enter the following command to query the pixel data of the captured frame.
GPEL? 10 100 //retrieves pixel values at X = 10 and Y = 100