Quantum Data 881 - Manual (Page 132)

114 Chapter 3 Administrative Tasks
To set the generator’s IP address:
1. Press the Tools key. The Tools menu appears on the generator’s display as shown
below.
2. Choose the System item by pressing the adjacent soft key. The System menu appears
on the generator’s display as shown below.
3. Choose the Network item by pressing the adjacent soft key. The generator’s IP address
and subnet mask appear on the generator’s display as shown below.
4. Press the Settings key. The Network Connection screen appears on the generator’s
display as shown below.
If the IP Address configuration option is not visible, press the soft key adjacent to the
arrow symbol by SubnetMask until IP Address appears.
5. Change the IP address as follows:
a. Position the blinking cursor on the address digit you want to change. To do this,
press the soft key adjacent to the arrow by the address to move the cursor left or
right until it appears on the digit you want to change.
b. Adjust the value of the digit up or down by pressing the + or - keys. Repeat for each
IP address digit you want to change.
System
Sequence
Probe
AFC
Analyzer
Reports
ImgShift
CEC
Clock Clone*
CalFactor Server
Network About
Serial GPib
IP Address
192.168.254.001
Subnet Mask
255.255.255.000
Network Connection
Set TCP/IP
IP Address
206.135.215.168