Quantum Data 881 User Manual
Page 354
336
Chapter 10 Testing HDMI Sink Devices
3. Press the
Content key and choose one of the audio images used for amplitude
adjustment (for example, Audio_1).
The image appears on the connected HDMI display. The image shows the current
settings for the HDMI audio output. For example, the Audio_1 image is shown below.
Alternatively, to select the audio image using the command line interface, enter the
following commands:
/tffs0/Library/Images
// Set image path to generator memory
AUDIO_1
// Loads the Audio_1 image
// Activates the Audio_1 image
4. Enable and view image versions to modify the audio amplitude for the Audio_1 image
as follows:
a. Press the
Options key. The following menu appears on the generator’s display:
b. Choose the
More item by pressing the adjacent soft key until a + and Rendition
appears next to the item.
c. Press the + and - keys to advance through the image versions to change the audio
intensity.
-More
Red+
-NoGamma
Green+
-Noise Blue+
+More Rendition: 000
Red+
-NoGamma
Green+
-Noise Blue+