Quantum Data 881 - Manual (Page 141)

881/882 Video Test Generator User Guide (Rev A.22) 123
To change the IP address of the generator:
1. From the Boot Menu select !InetAddr.
2. Choose the !InetAddr by pressing the adjacent item selection key. The generator’s IP
address and subnet mask appear on the generator’s display as shown below.
If the IP Address configuration option is not visible, press the soft key adjacent to the
arrow symbol by SubnetMask until IP Address appears.
3. Change the host IP address as follows:
a. Position the blinking cursor on the digit of the IP address you want to change. To
do this, press the soft key adjacent to the arrow by the address to move the cursor
left or right until it appears on the digit you want to change.
b. Adjust the value of the digit up or down by pressing the + or - keys. Repeat for each
digit you want to change.
!BootDev !Passwd
!HostName !Flags
!FileName !Other
!InetAddr !TrgtName
Network Connection
Set TCP/IP
IP Address
206.135.215.168