Brocade Network OS Message Reference v4.1.1 - Manual (Page 109)

Network OS Message Reference 93
53-1003227-01
AUTH-1035
8
AUTH-1035
Message
Invalid <data type> length in <message phase> message: length <data length>, port
<port number>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that a particular data field in the authentication message has an invalid length field. This error
usually relates to an internal failure.
Usually this problem is transient. The authentication may fail.
Recommended
Action
Reinitialize authentication using the shutdown and no shutdown commands or the chassis disable
and chassis disable commands.
If the message persists, execute the copy support command and contact your switch service provider.
AUTH-1036
Message
Invalid state <state value> for <authentication phase>: port <port number>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the switch received an unexpected authentication message. Usually this problem is
transient. The authentication may fail.
Recommended
Action
Reinitialize authentication using the shutdown and no shutdown commands or the chassis disable
and chassis disable commands.
If the message persists, execute the copy support command and contact your switch service provider.
AUTH-1037
Message
Failed to <operation type> response for <authentication message>: init_len <data
length>, resp_len <data length>, port <port number>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that a Diffie-Hellman Challenge Handshake Authentication Protocol (DH-CHAP) authentication
operation failed on the specified port due to mismatched response values between two entities. The error
may indicate that an invalid entity tried to connect to the switch.
Recommended
Action
Check the connection port for a possible security attack.
Reinitialize authentication using the shutdown and no shutdown commands or the chassis disable
and chassis disable commands.
If the message persists, execute the copy support command and contact your switch service provider.