Brocade Network OS Message Reference v4.1.1 - Manual (Page 139)

Network OS Message Reference 123
53-1003227-01
CHS-1002
8
CHS Messages
CHS-1002
Message
ki_gd_register_action failed with rc = <return value>.
Message Type
LOG | FFDC
Severity
ERROR
Probable Cause
Indicates an internal error.
Recommended
Action
Reload or power cycle the switch.
CHS-1003
Message
Slot ENABLED but Not Ready during recovery, disabling slot = <slot number>, rval =
<return value>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the slot state has been detected as inconsistent during failover or recovery.
Recommended
Action
For a modular switch, execute the power-off and power-on commands to power cycle the interface
module.
For a compact switch, reload or power cycle the switch.
CHS-1004
Message
Interface module attach failed during recovery, disabling slot = <slot number>,
rval = <return value>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified interface module has failed during failover or recovery.
Recommended
Action
For a modular switch, execute the power-off and power-on commands to power cycle the interface
module.
For a compact switch, reload or power cycle the switch.