Brocade Network OS Message Reference v4.1.1 - Manual (Page 463)

Network OS Message Reference 447
53-1003227-01
VCS-1001
8
VCS Messages
VCS-1001
Message
Event: VCS cluster create, Coordinator IP: <Coordinator's Public IP>, VCS ID: <VCS
Id>, Status: <Cluster status>.
Message Type
LOG | VCS
Severity
INFO
Probable Cause
Indicates that the VCS cluster has been created due to the initial VCS logical-chassis enable on two or
more nodes where a VCS cluster of the same VCS ID did not exist before.
Recommended
Action
No action is required.
VCS-1002
Message
Event: VCS cluster create, Coordinator IP: <Coordinator's Public IP>, VCS ID: <VCS
Id>, Status: VCS cluster failed to be created, Reason: <Error Reason>.
Message Type
LOG | VCS
Severity
ERROR
Probable Cause
Indicates that the VCS cluster failed to be created. Refer to the reason code for the cause of the error.
Recommended
Action
Refer to reason code for possible action.
VCS-1003
Message
Event: VCS node add, Coordinator IP: <Coordinator's Public IP>, VCS ID: <VCS Id>,
Status: rBridge ID <RBridge-id of Added Switch> (<IP of Added Switch>) added to
VCS cluster.
Message Type
LOG | VCS
Severity
INFO
Probable Cause
Indicates that a logical-chassis node has been added to the VCS cluster. The node was added because
the VCS logical-chassis is enabled on a node that was not a member of the VCS cluster.
Recommended
Action
No action is required.