Brocade Network OS Message Reference v4.1.1 - Manual (Page 148)

132 Network OS Message Reference
53-1003227-01
DCM-1014
8
DCM-1014
Message
Error Node replace model mismatch, chassis disabled WWN: <switch_wwn>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the replacement switch model is different from the model of switch being replaced; this is
not supported and therefore the chassis has been disabled.
Recommended
Action
Use the same switch model for replacement.
DCM-1101
Message
Copy running-config to startup-config operation successful on this node.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the running configuration has been copied to the startup configuration on the node.
Recommended
Action
No action is required.
DCM-1102
Message
Copy running-config to startup-config operation failed on this node.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates failure to copy the running configuration to the startup configuration on the node.
Recommended
Action
No action is required.
DCM-1103
Message
Copy default-config to startup-config operation successful on this node.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the default configuration has been copied to the startup configuration on the node.