Brocade Network OS Message Reference v4.1.1 - Manual (Page 247)

Network OS Message Reference 231
53-1003227-01
FW-3119
8
FW-3119
Message
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of inter frame gap violation errors that the port experiences has fallen below
the low boundary.
Recommended
Action
Respond to this message as is appropriate to the particular policy of the end-user installation. A low
number of inter frame gap errors means the system is operating normally.
FW-3120
Message
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the number of inter frame gap violation errors that the port experiences has risen above the
high boundary. Flapping interfaces during the traffic flow can generate this error. Congestion or
transmitting multiple frames without an inter frame gap.
Recommended
Action
Check loose connections and congestion in the fabric.
FW-3121
Message
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of inter frame gap violation errors that the port experiences has changed from
a value outside of the acceptable range to a value within the acceptable range.
Recommended
Action
Respond to this message as is appropriate to the particular policy of the end-user installation. Check
loose connections and congestion in the fabric.