Brocade Network OS Message Reference v4.1.1 - Manual (Page 94)

78 Network OS Message Reference
53-1003227-01
AG-1006
8
AG-1006
Message
Access Gateway mode has been <msg>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the Access Gateway mode has been enabled or disabled.
Recommended
Action
Execute the show ag rbridge-id {rbridge-id | all} command to verify the current status of the Access
Gateway mode.
AG-1007
Message
FLOGI response not received for the N_Port <port> connected to the fabric.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the N_Port connected to the fabric switch is not online. The specified N_Port has been
disabled.
Recommended
Action
Check the connectivity between the Access Gateway N_Port and the fabric switch port.
AG-1008
Message
Invalid Port Login (PLOGI) response from the fabric on the N_Port <port>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the fabric switch management server did not accept the N_Port Login (PLOGI) request
sent by the Access Gateway.
Recommended
Action
Check the configuration of the fabric switch connected to the Access Gateway.
If the message persists, execute the copy support command and contact your switch service provider.