Brocade Network OS Message Reference v4.1.1 - Manual (Page 425)

Network OS Message Reference 409
53-1003227-01
SSMD-1408
8
SSMD-1408
Message
<Number of ACL Rules> rules added to <ACL Type> access list <ACL Name>.
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that the specified rules are added to the access control list (ACL).
Recommended
Action
No action is required.
SSMD-1436
Message
<ACL Type> access list <ACL Name> partially active on interface <Interface Name>
at <Direction>.
Message Type
DCE
Severity
WARNING
Probable Cause
Indicates that the specified access control list (ACL) was not fully instantiated into the ternary content
addressable memory (TCAM).
Recommended
Action
Remove the specified ACL and other unused ACLs that are applied using the no ip access-group name
[in|out] command, and then instantiate ACL into TCAM again.
SSMD-1437
Message
<ACL Type> access list <ACL Name> inactive on interface <Interface Name> at
<Direction>.
Message Type
DCE
Severity
WARNING
Probable Cause
Indicates the specified access control list (ACL) was not instantiated into the ternary content addressable
memory (TCAM).
Recommended
Action
Remove the specified ACL and other unused ACLs that are applied using the no ip access-group name
[in | out] command, and then instantiate ACL into TCAM again.